Chain Adapter with test head Model PB3000-A3

This chain adapter portable tester derived from PB3000, specially used for large cylinders and around specimens that are too large size for a regular tester. With steel arms hold the chain to the test head and allows it to keep rigid while the chain takes the full thrust of the load. Supplied with 1.4m(4.6feet) or extension size as request.
www.startester.cn

Hardness tester for large cylinder

Chain Adapter with 3000kg test head

Features
1-The Portable Tester is suitable for use in the lab or in the plant. It is easy to operate and convenient to carry. It can be used to test all sizes of parts and parts in any direction (like upside down, underside, or side face).
2-By applying 3000kg test force and 10mm ball indenter, the permanent indentation can be inspected at any time after testing, and the existence of the indentation shows that the part has been tested.
3-The Tester applies the same principle as a bench type Brinell hardness tester. The result is far more accurate and repeatable than other portable Brinell hardness testers. The calibrated accuracy of the test force is 1% which confirms to ASTM E10.
4-Not limited to a 10mm ball and 3000kg test force. You have options of a 2.5mm, or 5mm ball and different test loads from 187.5kg-3000kg. The tester has multiple testing forces and indenters so that the King Tester can test all kinds of material and its testing range is 16-650 HBW.